Excursion 4WD V10-6.8L VIN S (2000)
7. Position the differential case retaining bolts.
8. Note: Use the special tool as shown to keep the differential case from turning.
Tighten the retaining bolts.
9. Press the new anti-lock speed sensor ring, if removed, and the ring gear on the differential case.
10. Note: Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-Al to the ring gear bolts.
Install the ring gear bolt and tighten.
11. Install the differential case.
Differential Case and Ring Gear-One-Piece, Traction-LOK