Excursion 4WD V10-6.8L VIN S (2000)
18. Inspect the following:
^
the differential case machine surfaces.
^
the differential ring gear mounting holes for deformities, such as egg shaping.
^
all surfaces for nicks and cracks.
19. Inspect the thrust washers for scoring and cracking.
20. CAUTION: Discard all gears in sets if one or more sustains wear/damage.
Inspect the gears for pitting, scoring, wear and damage.
21. Inspect the shafts for nicks and scores.
22. Refer to Drive Pinion if disassembly is necessary.
Assembly
