Excursion 4WD V10-6.8L VIN S (2000)
5. Using a suitable press, remove the bearing from the driveshaft.
6. Using a suitable press, remove the dust slinger.
Assembly
1. Note:
^
Clean grease deposits, dirt and rust from the stub shaft.
^
Inspect the stub shaft splines for nicks, gouges, or burrs. Remove with a file or emery cloth.
^
The driveshaft center bearing bracket must be installed with the deep flange rearward.
Follow the disassembly procedure in reverse order.
^
Lubricate the stub shaft spline with Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-13.
