Excursion 4WD V10-6.8L VIN S (2000)
4. Position the C-Frame and Screw in a swivel base vise.
5. CAUTION: Do not force the tool when the U-joint bottoms out as the center bearing shield may be damaged.
Using the C-Frame and Screw, press the driveshaft center yoke bearing cups through the opposite side.
^
Alternate the pressure between the U-joints.
6. Remove opposing bearing cups with gripping pliers.
7. Rotate the double cardan 180 degrees, and press the bearing cups through on the opposite side.
