Excursion 4WD V10-6.8L VIN S (2000)
8. Remove the bearing cups with gripping pliers.
9. Remove remaining bearing cups and spiders, and on the one-piece rear driveshaft, the spring.
^
The centering ball on the driveshaft end yoke is not serviceable. If the centering ball is damaged, the driveshaft will have to be replaced.
Assembly
1. Position the spider in the driveshaft end yoke, and position the bearing cup on the spider trunnion.
2. Using the C-Frame and Screw, press the bearing cup until the opposite bearing cup can be positioned on the spider trunnion.
3. Note: Align the index marks made during disassembly.
