Excursion 4WD V10-6.8L VIN S (2000)
3. Inspect the axle shaft O-ring seal for cracks, nicks or wear and replace it if required.
Installation
1. Install the axle shaft.
2. Note: Coat the threads of the retaining bolts with Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification
WSK-M2G349-A1.
Install the retaining bolts and tighten.
The Axle Shaft Assembly
The Axle Shaft Assembly procedures can be found under Differential Assembly. See: Differential Assembly