Excursion 4WD V10-6.8L VIN S (2000)
Wheel Bearing: Service and Repair
Front
Wheel Hub and Bearing - Motorhome
Wheel Hub and Bearing - Motorhome
Removal
1. Raise and support the vehicle.
2. Remove the front wheel and tire assemblies.
3. Remove the front disc brake caliper and position out of the way.
4. Remove the hub cap and gasket from the hub and rotor assembly.
5. Remove the cotter pin, adjusting nut and flatwasher.
6. NOTE: Inspect the condition of the spindle and nut threads to ensure a free turning nut when reassembling.
Remove the outer bearing cone and roller assembly.