Excursion 4WD V8-5.4L SOHC VIN L (2001)
Brake Pedal Assy: Service and Repair
Brake Pedal Control Switch
Removal and Installation
1. Disconnect the battery negative cable..
2. CAUTION: Use care not to damage the instrument panel when removing the headlamp switch.
Using a small screwdriver, pry the headlamp switch from the instrument panel.
3. Disconnect the electrical connectors from the headlamp switch..
4. Remove the adjustable pedal switch.
1. Push the adjustable pedal switch out of the instrument panel far enough to access the electrical connector.
2. Disconnect the electrical connector and remove the adjustable pedal switch.
5. To install, reverse the removal procedure.
