Excursion 4WD V8-5.4L SOHC VIN L (2001)
25. Support the engine using the Heavy Duty Engine Support by inserting the J-hook.
26. Raise and support the vehicle.
27. Remove the starter motor if the RH engine mount is to be repaired.
28. NOTE: For clarity, the engine is not shown. Remove the bolts and remove the engine mounts from the vehicle.
Installation
1. NOTE: For clarity, the engine is not shown. Position the engine mounts and install the bolts.
2. Install the starter motor if the RH front engine mount was repaired.
3. Lower the vehicle.
4. Using a floor crane, remove the 3-Bar Engine Support.
5. Align the engine mount studs and lower the engine.
6. Remove the floor crane.
7. Raise and support the vehicle.
