Excursion 4WD V8-5.4L SOHC VIN L (2001)
5. Remove the screws and the suction accumulator bracket.
6. Remove the screws and remove the evaporator core housing support bracket.
7. Remove the 11 screws, release the 3 retaining tabs and remove the evaporator core cover.
8. Remove the evaporator core.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install a new A/C evaporator core with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA
(Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B. See: Refrigerant Oil Addition.
-
Install new O-rings lubricated in clean PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C231-B.
2. Evacuate, leak test and charge the A/C system.
