Excursion 4WD V8-5.4L SOHC VIN L (2001)
Throttle Body Spacer: Service and Repair
REMOVAL
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND CAN BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
^
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING.
^
BEFORE WORKING ON OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL
SYSTEM PRESSURE MUST BE RELIEVED.
1. Disconnect the battery ground cable.
2. Relieve the fuel system pressure.
3. Remove the engine air cleaner, the air cleaner outlet tube and the accelerator splash shield.
4. Disconnect the throttle body cable.
^
Disconnect the accelerator cable..
^
Disconnect the speed control cable.
^
Remove the throttle return spring.
5. Position the cable mounting bracket aside.
1
Remove the bolts.
2
Position the cable mounting bracket aside.
6. Disconnect the following at the intake manifold:
1
Power brake booster vacuum supply hose.
2
Main vacuum supply line.