Excursion 4WD V8-5.4L SOHC VIN L (2001)
Traction Bar: Service and Repair
Bar -Track
Removal and Installation
1. Raise and support the vehicle.
2. NOTE: To prevent the front suspension from shifting when the track bar is removed, the front suspension must be supporting vehicle's weight.
Load the front suspension with the vehicle's weight.
1. Position jack stands under the front axle housing.
2. Lower the vehicle until the front suspension is supporting the vehicle's weight.
3. Remove the nut and bolt and disconnect the track bar from the upper mounting bracket.
4. Remove the nut and bolt and remove the track bar.
5. To install, reverse the removal procedure.
