Excursion 4WD V8-5.4L SOHC VIN L (2001)
5. Position the Ford Axle Locknut Socket on the hub nut.
6. CAUTION: Under no circumstances are power tools to-be used when performing these operations.
NOTE: The hub nut will ratchet as torque is applied.
Tighten the hub nut, rotating the rear hub occasionally while tightening.
7. Adjust hub nuts as follows:
-
For new bearings, ratchet back five teeth or notches (1/8 turn) on the hub nut. Five notches must be felt during this operation in order to have
performed it correctly.
-
For used bearings, ratchet back seven teeth or notches (1/6 turn) on the hub nut. Seven notches must be felt during this operation to have
performed it correctly.
