Excursion 4WD V8-5.4L SOHC VIN L (2001)
6. Connect the driveshaft.
7. Connect the rear anti-lock brake sensor electrical connector.
8. Remove the fill plug.
9. CAUTION: A lubricant level close enough to the bottom of the rill hole to be seen or touched is not sufficient. The lubricant must be level with
the fill hole.
Fill the axle with Motorcraft SAE 8OW-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification WSP-M2C I
97-A until the lubricant is level with the fill hole.
