Excursion 4WD V8-5.4L SOHC VIN L (2001)
15. Check the torque required to rotate one differential side gear.
^
Install the Traction-Lok Torque Tool Set with the 1/2-inch drive hole as shown.
^
The initial break-away torque, if the original clutch plates are used, must be within specification. The rotating torque required to keep the
differential side gear turning with new clutch plates may vary.
16. Install the ring gear and, if removed, a new anti-lock speed sensor ring on the differential case and tighten the retaining bolts.
17. Install the differential case.
Differential Case and Pinion Set Up - Dana 80
Differential Case and Pinion Set Up
