ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Seals and Gaskets, M/T|Service and Repair|Page 5253 > < Starting System - No Start/Repeat Starter Failure|Page 5249
Page 1
background image

Seals and Gaskets: Service and Repair

Seal-Output Oil 

Special Tool(s) 

Removal

 

All vehicles 

1. Raise and support the vehicle. 
2. Disconnect the rear driveshaft from the transmission and position it aside. 

Vehicles with 4-wheel drive 
3. Remove the transfer case. 

4. Using the special tools, remove and discard the output oil seal.

Seals and Gaskets, M/T|Service and Repair|Page 5253 > < Starting System - No Start/Repeat Starter Failure|Page 5249