Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
6. CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn
from the seat cushion foam.
NOTE: Do not separate the seat heater mat from the seat cushion foam. These components are glued together and must be repaired or replaced as
a unit.
Separate the seat fabric from the cushion hook and loop fasteners.
ASSEMBLY
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the
disassembly procedure.
1. Place the seat cushion foam pad on the seat cushion pan.
2. Position and stretch the seat fabric over the foam cushion while attaching the hook and loop fasteners.
3. WARNING: The metal edges of seat cushion pan can be sharp.
Attach the J-clips, butterfly clips and scrivets.
4. Install the front seat cushion assembly.
5. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
