ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Cooling System - Overheating/Coolant Loss|Page 3108 > < Cooling System - Overheating/Coolant Loss|Page 3106
Page 7
background image

(a) If either test indicates turbocharger repair or replacement is required, refer to the WSM, Section 303-01D General Procedures for Turbocharger

Reconditioning procedures. Turbocharger service must be performed while the turbocharger is off the vehicle for head gasket service in Step 9.

(b) If both tests indicate the turbocharger is operating properly, go to Step 9.

9. Head Gasket Replacement:

a. Replace the head gaskets. Refer to WSM, Section 303-01 C for head removal installation, cleaning and flatness measurement procedures. Refer

to Cylinder Head Gasket Identification Chart located at the end of this procedure. (Figure 5)

Cooling System - Overheating/Coolant Loss|Page 3108 > < Cooling System - Overheating/Coolant Loss|Page 3106