Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
Drive Pulley: Customer Interest
Diesel Engine - FEAD Belt Frayed/Shredded
TSB 05-13-16
FEAD BELT FRAYED/SHREDDED/BROKEN - 6.0L
DIESEL ENGINE - VEHICLES BUILT THROUGH
1/1/2005
FORD:
2003-2005 Excursion, F-Super Duty
2004-2005 E-Series
ISSUE
Some 2003-2005 F-Super Duty, Excursion and 2004-2005 E-Series vehicles equipped with the 6.0L engine and built prior to 1/1/2005, may exhibit a
frayed, shredded or broken front end accessory drive (FEAD) belt.
ACTION
Replace the water pump pulley with a new service pulley, and install a new FEAD belt. Refer to Workshop Manual Section 303-03 (Water Pump - 6.0L
Diesel). Ensure the new belt is installed properly on all pulleys.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
051316A
2003-2005 F-Super
1.3 Hrs.
Duty/Excursion 6.0L:
Replace The Water Pump
Pulley And Install A New
Accessory Drive Belt (Do
Not Use With 8509A,
8620F, 8501A)
051316A
2004-2005 E-Series 6.0L:
2.0 Hrs.
Replace The Water Pump
Pulley, And Install A New
Accessory Drive Belt (Do
Not Use With 8509A,
8620F, 8501A)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
8509
30
Disclaimer
