ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Exhaust Pressure Sensor > < Early Build (Before September 29, 2003)|Page 3297

Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)

Page 4
background image

7. Install the rear FICM bracket and nuts to the LH valve cover.

 - Tighten to 8 Nm (71 lb-in).

8. Install the FICM. 

9. Check the system for leaks.

Exhaust Pressure Sensor > < Early Build (Before September 29, 2003)|Page 3297