ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Fuel Injector Control Module: > < Engine Controls - Low Power/Surge/Rough Idle/Smoke
Page 1
background image

Fuel Injector Control Module: All Technical Service Bulletins
Diesel Engine - Hard or No Start Condition

TSB 04-17-13

09/06/04

HARD START OR NO START - GPCM CONNECTOR 
SERVICE KIT AVAILABLE - 6.0L ENGINE

FORD:
2003-2004 Excursion, F-Super Duty

ISSUE

Some 6.0L equipped vehicles may exhibit a hard start or no start condition due to a glow plug control module (GPCM) connector.

ACTION

Inspect the GPCM connectors for pin related concerns such as pin fit, pull out, bending, corrosion, etc. If a concern is found, replace the green or black
GPCM connector using the new GPCM connector service kit. The kit contains an instruction sheet and a replacement connector with a pigtail that can be
spliced into the existing harness. If no pin related concerns are present, proceed with normal diagnosis.

PARTS BLOCK

WARRANTY STATUS: 
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage

Operation/Description/Time

DEALER CODING

CONDITION

BASIC PART NO.

CODE

12B568

X2

Disclaimer

All Other Service Bulletins for Fuel Injector Control Module: > < Engine Controls - Low Power/Surge/Rough Idle/Smoke