Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
2. Remove the two (2) Torx T20 retaining screws and inspection plate from the back of the FICM. (Figure 2)
3. Inspect the buss connector screws.
a. If FICM is an early style with seven (7) connector screws, do not disassemble. Replace the FICM assembly. (Figure 3)
b. If FICM has four (4) connector screws, proceed to Step 4 for inspection and repair. (Figure 4)
4. Remove the four (4) Torx 110 buss post retaining screws . (Figure 4)
a. When removing the screws from the FICM, you may find metallic shavings. Be sure to clean any debris from the screws before reinstalling.
