ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Engine Control Module: > < Engine Controls - Low Power/Surge/Rough Idle/Smoke
Page 1
background image

Engine Control Module: All Technical Service Bulletins
A/T Controls - MIL ON/DTC's Set After A/T R & R

TSB 04-25-16

12/27/04

MIL ILLUMINATED WITH DTC P0756, P0761 OR P0771
AFTER OVERHAUL OR INSTALLATION OF 2005
TORQSHIFT TRANSMISSION

FORD:
2003-2004 Excursion, F-Super Duty
2004 E-Series

ISSUE
Some vehicles equipped with a 6.0L diesel and the Torqshift transmission, may exhibit the malfunction indicator lamp (MIL) illuminated with diagnostic
trouble code (DTC) P0756, P0761 or P0771. This condition will occur if the powertrain control module (PCM) and transmission control module (1CM)
are not reprogrammed after installing a 2005-level replacement transmission, installing transmission rebuild kit 5C3Z-7A398-SA, or after overhauling
the transmission with 2005-level components.

ACTION
Reprogram the PCM and 1CM to the latest calibration using WDS release B34.2 or higher. Calibration files may also be obtained at the website. Clear
KAM, DTCs and verify repair.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage

OPERATION

DESCRIPTION

TIME

042516A

Check For Diagnostic

0.7 Hr.

Trouble Codes And
Reprogram The Powertrain
Control Module (PCM) And
The Transmission Control
Module (TCM)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECALEM

42

Disclaimer

All Other Service Bulletins for Engine Control Module: > < Engine Controls - Low Power/Surge/Rough Idle/Smoke