Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
4.
Disconnect the fuel pump, fuel warmer and water-in-fuel electrical connectors from HFCM (Figure 2):
5.
Disconnect the fuel hoses from HFCM:
a.
Remove the fuel hose retaining clips and discard. Disconnect the fuel hoses from the fuel pump (Figure 3 - # 1).
b.
Press in the retaining clips and release the fuel hoses (Figure 3 - # 2).
6.
Remove the screws and the old fuel manifold cover (Figure 4).
7.
Inspect/clean debris from the HFCM water reservoir housing (max. 25 psi air).
