Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
OVERVIEW
This program involves inspecting the fuel injector harness, at the fuel injection control module (FICM), for chafing caused by the harness rubbing
against the intake manifold or rocker cover assembly bolt heads. If only a light amount of chafing has occurred (tape is worn through, the silver shielding
and possibly the wire insulation are visible), install protective shields to prevent further damage. If more extensive chafing has occurred (copper wire
strands are visible), the harness must be replaced.
INSPECTION
1.
If necessary, disconnect the hot-side charge air cooler (CAC) duct (passenger side of the vehicle) from the turbocharger outlet duct cuff.
