Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
2.
Position the cowl harness aside as follows. See Figure 1.
a)
Remove the bolt and position the manifold absolute pressure (MAP) sensor aside.
b)
Remove the ground strap bolt.
c)
Remove the power steering reservoir bolts and position the reservoir aside.
d)
Remove the cowl panel harness retaining bolts and position the harness aside.
3.
Remove the charge air cooler (CAC) tube bracket by removing the left- and right-side stud nuts and the bracket screws. See Figure 2.
4.
Remove the CAC tube.
5.
Rotate the accessory drive belt tensioner clockwise and remove the drive belt from the generator pulley.
6.
Remove the transmission fluid level indicator tube bracket nut from the generator and position the tube aside.