Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
LABOR ALLOWANCES
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts will not be direct shipped for this program. Order your parts requirements through normal order processing channels.
DEALER PRICE
For latest prices refer to DOES II.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures."
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
This program involves replacing the blow-molded (plastic) charge air cooler (CAC) cold-side duct with a metal duct with rubber cuffs at each end. This
duct is located on the left (driver) side of the engine compartment and is connected between the charge air cooler outlet and the intake manifold.
SERVICE PROCEDURE
1.
Remove the air filter cartridge and both the air filter inlet and outlet tubes.
