Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
Deactivate the supplemental restraint system (SRS).
3. NOTE: Make sure the wheels are in the straight-ahead position.
Remove the driver air bag module.
1
Remove the two steering wheel back cover plugs.
2
Remove the two driver air bag module bolts.
3
Disconnect the horn electrical connector.
4
Disconnect the clockspring electrical connector.
5
Remove the driver air bag module.
4. NOTE: Make sure the wheels are in the straight-ahead position.
Remove the steering wheel.
5. Apply two strips of masking tape across the clockspring to prevent accidental rotation.
6. Twist the tilt wheel handle and shank and remove.