Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
All vehicles
9. Install the upper steering column shroud.
10. Install the ignition switch lock cylinder.
-
Position the ignition switch lock cylinder to the RUN position.
-
Insert the ignition switch lock cylinder into the steering column.
-
Make sure the ignition switch lock cylinder is fully seated and aligned in the interlocking washer before turning the key to the OFF position.
-
Make sure the ignition switch lock cylinder retaining pin is seated in the hole in the steering column.
-
Rotate the ignition switch lock cylinder through all positions to verify operation.
11. Install the lower steering column shroud.
1
Position the lower steering column shroud.
2
Install the screws.
