Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
2. Disconnect and detach the driver safety belt switch.
3. Remove the safety belt bolts.
1
Use the T-55 Torx bit to remove the safety belt buckle bolt.
2
Use the T-55 Torx bit to remove the safety belt tongue bolt.
4. Remove the safety belt.
1
Remove the safety belt buckle.
2
Remove the safety belt tongue.
INSTALLATION
1. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.