Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
repaired. Safety belt assemblies must not be interchanged between vehicle models.
1. Position the second row seat to its most forward position.
2. Pull up to release the retaining clips and remove the safety belt buckle bracket cover.
3. NOTE: To aid installation, note the location of locating tab.
Remove the safety belt buckle.
1
Using special tool 501-D012 (D83L-2100-A) or equivalent, remove the bolt.
2
Position the safety belt buckle out from under the seat and remove it.
INSTALLATION
1. Install the safety belt retractor.
1
Position the safety belt retractor under the seat frame.
2
Align the tab to the slot in the floor.
3
Install the bolt.
