Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
Torx Bit, Safety Belt Bolt
SPECIAL TOOL(S)
REMOVAL
1. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Use the Seat Belt Bolt Bit to remove the bolt.
3
Remove the shoulder safety belt guide.
2. Remove the rear seat.
3. Remove the rear seat back upper moulding.
4. Remove the safety belt anchor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the safety belt anchor.
5. Remove the front door scuff plate and the rear center trim panel.