Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
Refill
7. After the torque converter has drained, install a new drain plug.
8. Install the torque converter drain plug cover.
All vehicles
9. Install the drain plug.
10. CAUTION: The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or
transmission failure.
Fill the transmission.
^
Add 6.2 liters (6.5 qts) of clean automatic transmission fluid to the transmission through the fluid filler tube.
11. Start the engine. Move the transmission range selector lever through all the gear ranges, checking for engagements.
12. With the engine running and the transmission at normal operating temperature 66 - 77°C (150 - 170°F), check and adjust the transmission fluid
level, and check for any leaks. If fluid is needed, add fluid in increments of 0.24 liter (0.5 pint) until the correct level is achieved (fluid should be
in the cross-hatched area of the fluid level indicator).
Draining
Vehicles not equipped with a fluid pan or a torque converter drain plug
1. With the vehicle in NEUTRAL position it on a hoist. For additional information, refer Maintenance/Service and Repair.