Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
7. Disconnect the Output Shaft Speed (OSS) sensor.
8. Lower the transmission to gain access to the bolts. Remove the bolts and the extension housing.
9. Remove and discard the extension housing gasket.
Installation
All vehicles
1. NOTE: The extension housing must have a shoulder or a boss cast into it to hold the orifice lube plug in the back of the transmission case.
NOTE: If the wrong extension housing is used, the orifice lube plug may become loose and/or fall out and cause transmission damage.
NOTE: Lightly lubricate the extension housing gasket with petroleum jelly to hold it in place during assembly.
Install the extension housing.
