Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
12. Disconnect the hydraulic brake hose and axle vent hose at the crossmember. Plug the brake hose and brake line, and position the hoses aside.
13. Support the axle with a suitable floor Jack.
14. NOTE: Mark the front of each spring seat cap for proper orientation during installation.
Remove the U-bolt nuts, the spring seat caps and the U-bolts.
15. WARNING: Watch for obstructions while lowering and removing the axle.
Carefully lower the axle and remove it.
Installation
1. Follow the removal procedure in reverse order.
^
Refer to Rear Suspension for the shock absorber, the sway bar and the U-bolt torque specifications.
^
Refer to Wheels and Tires for the wheel lug nut torque specifications.