Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
9. CAUTION: Discard the hub nut if the hub nut comes apart during removal.
CAUTION: Under no circumstances are power tools to be used when performing these operations.
NOTE: The hub nut will ratchet during this operation.
Remove the hub nut (counterclockwise for right-hand thread; clockwise for left-hand thread).
10. Install the Step Plate.
11. Install the 2-Jaw Puller and loosen the rear hub to the point of removal.
12. CAUTION: Do not drop the outer hub bearing when removing the hub.
Remove the rear hub assembly.
