Excursion 4WD V8-6.0L DSL Turbo VIN P (2004)
2. Install the safety belt buckle cover.
3. Adjust the seat to the full forward and rearward positions a few times to ensure safety belt and buckle accessibility.
4. Check the active restraint system for correct operation.
Center
SAFETY BELT BUCKLE - SECOND ROW, 60/40, CENTER, EXCURSION
Torx Bit, Safety Belt Bolt
SPECIAL TOOL(S)
REMOVAL
1. Position the second row 40 percent seat forward.
2. Remove the safety belt buckle.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt buckle.