Excursion 4WD V8-7.3L DSL Turbo VIN F (2000)
7. Note:
^
Align the tab on the anti-lock speed sensor ring with the slot in the differential case.
^
Apply Threadlock(R) and sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 to the new bolts.
Align the tab in the anti-lock speed sensor ring with the slot in the differential case. Start the two bolts through the differential case flange and into
the differential ring gear to make sure the differential case and the differential ring gear bolt hole align.
8. Press the anti-lock speed sensor ring on the differential case. The differential case flange acts as a pilot for the anti-lock speed sensor ring.
9. Note: Apply Threadlock(D and Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 to the new bolt threads.
Draw up the Grade 9 bolts alternately and evenly.
10. Install the differential bearings.
