EXP L4-098 1.6L VIN 4 2-bbl (1982)
Lifter / Lash Adjuster: Specifications
Engines may be encountered with oversize tappets (all eight) and/or an oversized camshaft. Oversize tappets will be identified by a stamping .254
OT'' on the machined pad below the rocker arm rail and above the No.1 exhaust port. Oversize camshaft will be identified by a stamping .38O/C'' on
the cover rail above the No. 4 exhaust port and by stamping .38 O/S'' on the distributor drive end of the camshaft.
Lifter Bore Diameter
.8754-.8766 in
Lifter Diameter
0.874 in
Lifter To Bore Clearance
.009-.0026 in
Note: Maximum, .005 inch.
