EXP L4-098 1.6L VIN 4 2-bbl (1982)
Install the valve and the 3-inch piece of hose such that the black side of the valve is facing the vacuum source.
8.
Refer to Exhibit IV (Page 12). Affix a new Vehicle Emission Control Information (VECI) decal over the existing decal. Verify that the vehicle
identification number (VIN) printed on the decal matches that of the vehicle.
Exhibit V - Emissions Recall 86E51
9.
Refer to Exhibit V. Prepare an Authorized Modifications decal (Form FPS-8262) as shown. Affix the decal to a flat clean surface on the radiator
support.