EXP L4-098 1.6L VIN 4 2-bbl (1982)
Figure 11 - SEATING BEARING OR INPUT SHAFT SEAL
5.
Install input shaft bearing with wide face of case outward (Figure 10) in valve bore. Seat with Tool T81P-3504-R or equivalent by tapping
end with plastic mallet (Figure 11).
Figure 12 - Tool T81P-3504-P
6.
Install input shaft seal protector (Tool T81P-3504-P or equivalent) over input shaft. Apply a film of gear lube (Part No. C3AZ-19578-A) to
the input shaft seal and install with lip spring toward valve (Figure 12). Remove seal protector from input shaft and seat seal with Tool
T81P-3504-R or equivalent (Figure 12).