EXP L4-98 1.6L SOHC Turbo VIN 8 FI (1984)
FIGURE 5
Removal:
1.
Remove door trim panel and watershield.
2.
Remove the pop-rivets attaching the bellcrank assembly (21848-9) and power actuator (218A42) to the door (Figure 5, View A).
3.
Disconnect the door latch actuator rod (20A26) from the latch.
4.
Disconnect the wiring connector from the power actuator.
5.
Remove the rod, bellcrank and power actuator from the vehicle.
NOTE:
The yellow clip (389666-S) can be re-used to attach new power actuator rod to latch lever.
Installation:
1.
Connect wire assembly (14024-5) to new design power actuator (E4FZ-74218A42-B - R.H.), (E4FZ-74218A43-A - L.H.) and attach power
