EXP L4-98 1.6L SOHC Turbo VIN 8 FI (1984)
5.
Install input shaft bearing with wide face of case outward (Figure 9), in valve bore. Seat with Tool T81P-3504-R or equivalent by tapping end with
plastic mallet (Figure 10).
Figure 11
6.
Install input shaft seal protector (Tool T81P-3504-P or equivalent) over input shaft. Apply a film of gear lube (Part Number C3AZ-19578-A or
equivalent) to the input shaft seal and install with lip spring toward valve (Figure 11).
Figure 10
Remove seal protector from input shaft and seat seal with Tool T81P-3504-R or equivalent (Figure 10).