Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Antenna Cable: Service and Repair
REMOVAL
1. Remove the inner splash shield.
1. Remove the five screws.
2. Pull the inner fender splash shield to release the three clips.
2. Disconnect the radio antenna lead-in cable from the antenna base.
3. Remove the radio chassis.
4. Push the radio antenna lead-in cable into the passenger compartment.
1. Disconnect the radio antenna lead-in cable from the clip.
2. Push the grommet into the passenger compartment.
3. Push the radio antenna lead-in cable into the passenger compartment.
5. Remove the radio antenna lead-in cable.
