Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Rear Door Exterior Handle: Service and Repair
Outside Door Handle, Rear Door
Removal
1. Remove the rear door trim panel.
2. Remove the outside rear door handle.
1. Remove the nuts.
2. Disconnect the rear door latch to outside rear door handle rod.
3. Remove the outside rear door handle by pushing it out from the bottom surface of the handle.
Installation
1. NOTE: Make sure the door handle and rods are in a relaxed position and that the rod is all the way up before closing the clips.
To match reverse the removal procedure.
