ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sunroof / Moonroof Motor|Specifications|Page 11077 > < Sunroof / Moonroof Motor|Specifications|Page 11075
Page 1
background image

Sunroof / Moonroof Motor: Service and Repair

REMOVAL 

1. Remove the access cover.

NOTE:  The sliding roof glass should be in the closed position.

2. Remove the three bolts.

3. Disconnect the electrical connector and remove the sliding roof panel motor.

INSTALLATION 

1. Connect the electrical connector.

NOTE:  Sliding roof glass should be in the closed position.

2. Cycle the sliding roof panel motor sliding roof panel motor until it stops in the closed position.
3. Remove the glass panel.
4. Insert two 1/8 inch pins through both portions of the lifter assemblies.

Sunroof / Moonroof Motor|Specifications|Page 11077 > < Sunroof / Moonroof Motor|Specifications|Page 11075