ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Quarter Window - Wind Noise|Page 11260 > < Rear Quarter Window - Wind Noise
Page 2
background image

Remove the rear door quarter window and remove 2 mm of the backside of the white locating clips next to the foam seal using metal shears or side
cutters (Figure 1). This will reduce the possibility of windnoise by allowing the weatherstrip to seat properly. Refer to the 1997 Expedition Workshop
Manual, Section 501-11, for quarter window removal and installation procedures.

OTHER APPLICABLE ARTICLES: NONE

SUPERSEDES: 97-8-12

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION

DESCRIPTION

TIME

971313AT

Trim Locating Clips - Both

0.9 Hr.

Doors

971313A

Trim Locating Clip - One

0.6 Hr.

Door

DEALER CODING

CONDITION

Rear Quarter Window - Wind Noise|Page 11260 > < Rear Quarter Window - Wind Noise