ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Anchor Plate|Page 7195 > < Anchor Plate|Page 7193
Page 4
background image

WARNING:  The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so may result
in unexpected inflation or deflation of the air springs which may result in shifting of the vehicle during these operations
.

3. Remove the wheel and tire assembly.

a. Remove the lug nuts.
b. Remove the wheel and tire assembly.

Inspect Lining

4. Inspect the brake shoes and linings for wear or contamination.

a. Replace the lining if worn to or past specification.

 

NOTE:  Replace the brake shoes and linings in complete axle sets.

5. Disconnect the brake hose.

a. Remove the brake hose bolt.
b. Remove the copper washers and plug the brake hose.
c. Disconnect the brake hose.

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. avoid contact with eyes. Wash hands thoroughly after handling. if
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately.
  

Remove Rear Disc Brake Caliper

6. Remove the rear disc brake caliper.

Anchor Plate|Page 7195 > < Anchor Plate|Page 7193