Expedition 2WD V8-281 4.6L VIN W EFI (1997)
6. Remove the front disc brake caliper.
a. Remove the two caliper bolts.
b. Lift the front disc brake caliper off the front disc brake caliper anchor plate.
CAUTION: When removing the front disc brake caliper, never allow it to hang from a brake hose. Provide a suitable support.
7. Inspect the disc brake caliper for leaks.
^
If leaks are found, disassembly is required.
8. Remove the disc brake anti-rattle clips.
a. Remove the brake pads.
b. Remove the disc brake anti-rattle clips.
INSTALLATION
1. Install the brake pads.