ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Customer Safety Information|Page 7234 > < Customer Safety Information|Page 7232
Page 1
background image

Brake Rotor/Disc: Vehicle Damage Warnings

WARNING:

^

Always remove any corrosion, dirt or foreign material present on the mounting surfaces of the wheel or the surface of the wheel hub, 
brake drum or front disc brake rotor that contacts the wheel. Installing wheels without proper metal to metal contact at the wheel
mounting surfaces can cause the lug nuts to loosen and could allow the wheel to come off while the vehicle is in motion, causing loss of
control.

^

The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can
be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so may result in unexpected
inflation or deflation of the air springs which may result in shifting of the vehicle during these operations.
 

CAUTION:

^

Do not use heat to loosen a seized lug nut. Heat can damage the wheel and the wheel bearings.

Customer Safety Information|Page 7234 > < Customer Safety Information|Page 7232